2024 Case IH Disc Mower Conditioners DC165

Current Case IH Mowers-and-Conditioners Disc Mower Conditioners

Swipe to View More

Year 2024
Make Case IH
Model Disc Mower Conditioners

Disc Mower Conditioners

Fast cutting and high-quality conditioning for superior hay quality and windrow formation. An expanded variety of new models with additional cutting widths.

Big Productivity in any Package Size

Case IH now offers additional sizes of center-pivot DC5 series disc mower conditioners for more performance options in a smaller, convenient package. Combined with DC3 series side pull disc mower conditioners, which provide industry-leading cut and crimp for optimal windrow formation and superior nutrient retention, you’ll experience better crop flow and faster dry down while no-tool adjustments and new sizes get you to and from the field faster. Available with the quick-change knife system and three-year cutterbar warranty.

Industry-leading cut and crimp for superior hay quality and optimal windrow formation with a 16 ft. 5 in. (5 m) cutterbar width and 10 discs.

Features may include:

Durable and Versatile Cutterbar

The DC3 series disc mower conditioners have a cutterbar designed for durability and maximized profit. Featuring a modular design, simplified drive system, quick-change knives and counter-rotating discs and a 3-Year Warranty.

Easy Access to the Cutterbar for More Productivty

The Case IH Disc Mower Conditioners cutterbars are easily accessible for adjustments or repairs. Either bi-fold doors or a single-piece hood offers full access.

Best-in-Class Conditioning

The wider conditioners on the Case IH Disc Mower Conditioner series allows for a thinner crop mat, leading to uniform conditioning and greater sun exposure for faster dry down. The torsion-bar roll-pressure design applies equal force to the conditioning rolls for greater consistency, with an almost 1-to-1 cut width to conditioner ratio on DC103 and DC133 models. The innovative Case IH flail system removes the waxy outer layer for faster dry-down in grass.

Make Adjustments in the Field

Several systems on the disc mower conditioners can be adjusted without tools, letting you get into the field faster.

Windrow Formation - Swathgate and forming shields are easily adjusted without tools. Spread wide or narrow to fit your needs

Conditioning Roll Pressure - A single point of adjustment fine tunes the roll pressure

Knife Maintenance - The provided tool allows you to change the quick-change knives in seconds

Cutting Height - Repositioning a pin in the hydraulic tilt cylinder changes the cutting height

Maximum Turning Performance

Get maximum turning performance with zero driveline wrap-up. On either the drawbar swivel hitch or two-point hitch the PTO power is transferred from the front swivel gearbox to a second swivel gearbox at the rear of the tongue maintaining perfect alignment of the driveshaft. A simple clevis hitch is also available.

Peace of Mind Comes Standard

To provide our customers with peace of mind during hay season DC3 and DC5 series mower conditioners will now come with a two-year base warranty. From the hitch to the rear axle, we want our customers to know that we’ve got their backs.

PTO

PTO Power, Rated Engine Speed Minimum Required: 100 hp | Shaft Spline: 1,000 rpm

PTO Type Shaft Spline: 21-spline

Drivetrain

Driveline Protection: Slip clutch and overrunning clutch assembly @ rear of PTO shaft

Wheels & Tires

Tires, Rear Specification Ag Rib Implement: 12.5L ×15 8PR

Operational

Operating Speed Disc @ 1,000 rpm PTO: 2,250 rpm | Knife Tip @ 1,000 rpm PTO: 168 mph (270 kph) | Input: 1,000 rpm | Roll Conditioning: 760 rpm from factory 640 rpm with drive/driven roll swap

Hydraulics

Hydraulic Type Circuits Required: Two Circuits Required: 1 Double Acting - Operate Swing Circuit, 1 Single Acting - Operate Raise/Lower Circuit on Roll Conditioning Units or 1 Double Acting - Operate Raise/Lower Circuit on Flail Conditioning Units

Chassis

Hitch/Type Drawbar / 3-pt: ASAE Cat. 2 or 3 drawbar (90 mm max drawbar width) / Cat. 2 or 3 3-pt hitch

Dimensions

Dimensions Cutter Bar Tilt Angle: 2 – 10 degrees | Knife Angle: 12 degrees | Roll Conditioning Diameter: 2×10.4 in. (264 mm) flail rotor | PTO Size Requirements: 1.375 in. (3.75 cm)

Cutting Width 16 ft. 5 in. (5 006)

Height Cutting: 0.5 – 2.6 in. (12 – 65 mm) | Operating: 6 ft. 7 in. (2.01 m)

Knife Length 4.95 in. (126 mm)

Length Roll Conditioning: 125 in. (3 175 mm)

Width Min-Max Swath: 10 ft. (3.0 m)

Windrow Width Min-Max: 3 –8 ft. (.9 - 2.4 m)

Transport Width 16 ft. 5 in. (5 006 mm)

Transport Length (2-pt Swivel / Drawbar Swivel Hitch): 32 ft. 0 in. (9.7 m) / 31 ft. (9.4 m)

Weights

Weight Vertical on Drawbar / 3-pt Lower Links: 1,475 lb. (669 kg)

Weight, In Running Order Operating (Rubber / Steel): 6,980 lb. (3 166 kg) / 7,080 lb. (3 211 kg)

Features

Features Number of Discs: 10 | Roll Conditioning Type: Chevron intermeshing molded rubber, or chevron intermeshing steel rolls |

Knife Quantity per disc: 2

Cutterbar Type Shear Protection: Standard - Frangible splines in disc drive hub

Adjustability Conditioning Roll Tension Adjustment: Single crank, torsion bar roll pressure | Conditioner Roll Gap Adjustment: Adjustable drawbolt, each end | Conditioner Roll Timing Adjustment: Slotted holes on upper roll drive sprocket | Windrow Width Adjustments: Horizontal swathgate with adjustable fins Vertical Windrow forming shields

2024 Case IH Disc Mower Conditioners DC165